Roll Up Tread 1/2″

The Roll Up Tread 1/2″ provides support for medium foot and cart traffic. The durable 1/2″ aluminum rail design assures stability and longevity, while the vinyl hinge allows the tread to be rolled up and moved for easy cleaning.

Need help finding the right product? I’m sure we have a solution!

Call Toll Free: (833) 428-0461

GET PRICING

Description

Product Options:  GB 200 Series

Product Documents:  

General Information for GB200 Series

  • Roll Up Tread 1/2″ recessed floor matting is a strong low profile entrance system that provides 25% more surface wiping area then other Aluminum mats.
  • Our Roll Up Tread 1/2″ Recessed Entry Mats are Custom Made – There may be common sizes, but each mat is made to order.
  • The metal portion of the grate for this type of recessed mat measures 1/2″ in depth.
  • Our Roll Up Tread 1/2″ Recessed Floor Mat can handle rolling loads of up to 750 lbs per wheel and are made from 6063-T52 aluminum spaced at 1-1/2″ on center.
  • The Roll Up Tread 1/2″ – Recessed Floor Mat is notoriously dependable and are mats that can perform for decades.  The inserts may require replacing, but the mat itself will last for a long time barring damage.
  • Offers a variety of different insert treads.
  • Roll Up Tread 1/2″ can be used for Indoor or Outdoor recessed entrance mats.
  • Recessed door mats made from 6063-T52 corrosion resistant Aluminum.
  • Weather resistant hinges and foot pads remain flexible through time giving this mat longevity.
  • 38.3% pre-consumer Recycled Content.
  • Roll Up Tread 1/2″ Recessed Door Mat is designed to allow dirt and moisture to fall below the surface so that it does not get tracked into the building.
  • A solid 1/8″ thick vinyl “T” profile footer runs along the full length and width of each section to help provide a low impact cushion for foot and cart traffic.
  • These recessed mats include an optional 1/2″ x 1-1/2″ x 1/16″  L-shaped aluminum Frame.
  • LEED: Possible LEED- NC credits; MR credit 4 (1-2 points) MR credit 5 (1-2 points) IEQ credit 5 (1 point)
  • Lead time depends on the type of Metal Finish desired for low profile entry mat:  Standard Mill takes 1-2 weeks, Anodized Finish can take 3-4 weeks.

 

To Receive a Proper Quote we will need the following Information:  
  • Name, Company Name, Phone and/or Email
  • Recess Depth of Pit
  • Frame Type- No Frame, L Frame, Surface Mount
  • Finish of the Aluminum – Mill Finish, Clear anodized, Medium Bronze anodized, Dark Bronze Anodized, Black Anodized, etc.
  • Insert Type – GB200 Mono Scrape Carpet, GB201 Vinyl, GB202 Polybrush, , GB204 Vinyl Abrasive, or GB205 Serrated Aluminum
  • Size of Recess – Width (wide) x Length (tall)
  • Ship To Zip Code for freight
 
Once you have this information, submit a quote request, call us at (833) 428-0461 or email us at help@madmatter.com
 PLEASE NOTE: Colors are computer generated and do not accurately match actual insert colors. Please refer to actual color samples. 

ALUMINUM FINISHES

FRAME OPTIONS

Aluminum L-2 L Frame Recessed Application

  • Use L Frame when the pit has already been formed.
  • 1/2″ total depth, 7/16″ to 1″ bottom leg
  • 1/4″ Gauge Aluminum surface reveal.
  • Secure option
  • Recommended that screeding the pit floor to level with the horizontal leg of the frame profile
Aluminum B-2 Surface Aluminum Ramp Surface Applications 

  • Beveled Aluminum Edge that can be permanently screwed into the floor.
  • Edge is not attached to the Roll up mat – Holds the mat in place.
  Aluminum Threshold Aluminum Threshold Applications 

 

 

 

Tread Options

 PLEASE NOTE: Colors are computer generated and do not accurately match actual insert colors. Please refer to actual color samples. 

Aluminum Finishes

Frame Options

Aluminum L-2 L Frame Recessed Application

  • Use L Frame when the pit has already been formed.
  • 1/2″ total depth, 7/16″ to 1″ bottom leg
  • 1/4″ Gauge Aluminum surface reveal.
  • Secure option
  • Recommended that screeding the pit floor to level with the horizontal leg of the frame profile
Aluminum B-2 Surface Aluminum Ramp Surface Applications 

  • Beveled Aluminum Edge that can be permanently screwed into the floor.
  • Edge is not attached to the Roll up mat – Holds the mat in place.
  Aluminum Threshold Aluminum Threshold Applications 

 

Specifications

  • Materials: Corrosion-Resistant 6063-T5&T6 aluminum with numerous insert options
  • Weight Load Capacity: 750 lbs. per wheel
  • Thickness: 1/2″
  • Depth: Mat and L-2 frame: 1/2″
  • Frame: Recess or surface mounted
  • LEED: based on NCv4
    – v4 MR p2
    – v4 MR c1
    – v4 MR c3
    – v4 EQ c1
  • Recycled Content: 38.3% per-consumer
  • Additional Specs: 6063-T5 &T6 aluminum spaced 1-1/2″ on center, connected with vinyl hinges and 1″ x 1/8″ slotted holes for maximum drainage
  • Custom alternation patterns are available for all inserts

Cleaning Instructions

Cleaning and Maintenance Instructions Recessed Aluminum Floor Mats

General:

  • During the winter season, remove product and clean rails once per week. During other seasons, once per month should be sufficient.
  • Debris between the rails should be removed during the cleaning process. Each time the rails are cleaned, make sure there is no debris underneath in the recess; this will prevent product from warping due to an uneven substrate and prevent long-term problems. (Vacuuming is the most effective method for this cleaning.)
  • If the units are above a drain, ensure that nothing is blocking the water flow to the drain.
  • Never apply wax or other polishing products to the surface of the units; this would create apotential hazard.

Specifics:

  • Clean aluminum surfaces with soap and hot water, then allow mat to dry.
  • If applicable, periodically clean carpet and scraping inserts with a hot water extraction machineto remove soil and restore pile.

Exceptions (in addition to above):

  • When cleaning products manufactured with rubber hinges (Roll Up Tread 1/2″, Mid-Profile Roll Grate 3/4″ , and Vinyl Hinge Low Profile 3/8″), inspect the hinges and locking mechanism to ensure that all parts are securely attached and are functioning properly. Any parts not functioning properly should be replaced to avoid further problems.
    • A stainless-steel cleaner can be utilized, if desired, to maintain surface shine on FootGrille products (stainless steel); Simple Green or Sheila Shine are good options. Just follow the manufacturer’s directions on whatever cleaner is chosen.

Installations Instructions

Installation instructions for Mid-Profile Roll Grate 3/4″ & Roll Up Tread 1/2″

Guidelines:

Before any installation is started, be sure to verify:

• Model of tread and frame

• Size of tread and frame

• Product color

• That there are no visual defects or damage from shipment

Important: No returns will be accepted after the material has been installed.

Failure to follow these installation instructions may void your warranty.

 

Mad Matter Shallow Recessed Installation Instructions:

1. Prepare a recess in the concrete flooring at least 1/2”deep (for Roll Up Tread .”) or 3/4” deep (Mid-Profile Roll Grate .”) for frame. The designated cut out area will also be the outside frame dimension. Consult your shop drawing for proper depth and overall outside frame dimensions.

2. Drill holes in the frame at 18 to 24-inch intervals for the bolts/screws. Countersink the holes as the tread will set inside the frame. (This prevents tread from riding up.)

3. Set the frames into position within the recess. Mark the hole locations on the concrete. Remove the frames and drill holes in the floor for the anchors. Clean the concrete dust away and install the anchors.

4. Reinstall the frames using the appropriate anchor bolts. If needed, shim under the frame sections so the top edge of the frame is flush with the finished floor and level.

5. Secure the frame to the concrete bed (straight down) using anchor bolts or screws of choice that are set vertically. Stainless steel screws and plastic anchors may also be used.

6. Pour concrete (using non-shrinking grout) around the edges of the frame (if needed) and in the center of the frame, level with the inside lip of the frame.

7. Level the concrete. Use a board slightly smaller than the frame opening and level

the concrete in each part of the recess. Make sure the concrete (using non-shrinking grout) is smooth and level with the leg of the frame so the tread lies perfectly flat and will not shift.

8. Before the concrete hardens, verify that the dimensions are correct, frame is square and level, and the frame corners are at correct angles, so the mat will fit properly. Verify the outside frame dimensions are identical to your shop drawing.

9. After concrete has hardened, install plywood into the recess to fully protect the frame edges until the entrance is opened and the mat is installed.

10. Clean all frames and recess before installing mat; debris cannot be tolerated between the frame and tread.

Recessed Mat Fabrication Instructions:

1. Place mat to be cut on sturdy tabletop surface. On one end of the table, fasten a straight edge bar or angle piece to serve as a stop edge for one end of the product. Be sure bar is square on the table.

2. Butt one end of the mat tight to bar fastened to table. Secure width of mat (traffic direction) to the table with screws in between drain holes of hinge.

3. Measure to desired length to be cut and mark product with fine tip black marker.

4. If trimming only 1⁄4” or so, cut carefully with a portable band saw. Prior to cutting it would be ideal to clamp an additional bar or straight edge to top of product to hold mat steady. If trimming more than 1⁄4” or so, a circular saw with a sturdy carbide-tipped blade would work just as well. Use a straight edge or angle piece for saw to travel against to achieve a nice even cut. Be sure to clamp straight edge to product prior to cut.

5. After cut, clean any smudges or markings with lacquer thinner. Remove set screws from cut-off pieces and install set screws to secure hinge in rails. Brush out ends of tread, then singe with a propane torch (on low setting).

6. Clean up product and return to service.

 

Rail Removal/Addition Instructions:

  1. Use an H-2 (5/64”) or a 5/64” Allen Wrench Hex Key.
  2. Install the driver bit in the tip of a cordless hand drill, screw gun, or use the wrench for manual removal.
  3. Back out set screws on the bottom side of the rails.
  4. Slide rail forward to remove rail from mat.
  5. Using the same process in reverse, re-assemble and re-set screw remaining mat piecestogether.

Warranty

The Mad Matter, Inc warrants to its purchasers, for a period of two years on standard products from the date of shipment, that any entrance floor mat or grid will be free of defects in workmanship and materials. The liability of The Mad Matter, Inc is strictly limited to repair or replacement of the product that, in our opinion, were properly installed and subsequently found defective. The warranty is not applicable if the mats or grids are damaged by overloading or if standard cleaning and maintenance procedures are not respected. No claims for consequential damages of any nature will be allowed. This warranty is in lieu of all other warranties, expressed or implied.

LEED Information

  • Indoor Environmental Quality Credit 5 (1 point): Indoor Chemical & Pollutant Source ControlBaseMat Series products are intended for permanent installation. To qualify for IEQ Credit 5, the product must be at least 10 feet in length in the primary direction of travel. BaseMat Series products may contribute to LEED IEQ Credit 5.
  • Materials & Resources Credit 4 (1-2 points): Recycled Content
    BaseMat Series products are manufactured from approximately 49% pre-consumer recycled content. BaseMat Series products may contribute to LEED MR Credit 4.

– BaseMat Series products with HD carpet or polybrush insert have 45.8% pre-consumer recycled content.

– BaseMat Series products with all other inserts have 38.30% pre-consumer recycled content.

Materials & Resources Credit 5 (1-2 points): Regional Materials
The manufacturing facilities are located in Minnesota, USA. Depending upon the project location, using these products may qualify for LEED MR Credit 5.