Close

Additional Information

Site Information

Switchboard Mats

switchboard-corrugated.jpg

Corrugated Switchboard Matting - Type 2, Class II Non-Conductive Matting

  • Corrugated Switchboard Matting - Type 2, Class II Non-Conductive Matting is the most popular style of Switchboard Matting to prevent electric shock in high voltage environments
  • 30,000 VAC Dielectric Test Voltage
  • Tested to ASTM D178/ANSI J6.7 - Certification engraved on underside of matting
  • 1/4" Thickness - While tested to 30,000 volts, recommended maximum use voltage of 17,000 is suggested for Corrugated Switchboard Matting - Type 2, Class II Non-Conductive Matting
  • Cut Lengths in 2', 3' and 4' Widths up to 75' length
  • Corrugated Vinyl Surface for Non-Slip
  • Meets all optional requirements for Ozone Resistance, Flame Resistance and Oil Resistance
  • Use Corrugated Switchboard Matting to protect personnel from electric shock around high voltage equipment like fuse boxes,and control panels
military-switchboard-diamond-plate.jpg

Military Switchboard - Diamond Plate - Type III - Non-Conductive Matting

  • Military Switchboard - Diamond Plate - Type III Non-Conductive Matting conforms to MIL Spec. MIL-DTL-155626
  • Dielectric Test Voltage of 30,000 VAC
  • Recommended Maximum Use Voltage  of 3,000 VAC
  • 3/16" Thickness makes Military Switchboard - Diamond Plate - Type III Non-Conductive Matting offers low profile protection from electric shock
  • Color: Gray
  • Diamond Plate Surface Pattern provides superior non-slip surface
  • Military Switchboard - Diamond Plate - Type III Non-Conductive Matting is available in 3' wide rolls up to 75' in length
  • Cut Lengths Available
  • Military Switchboard - Diamond Plate - Type III Non-Conductive Matting is approved for use by all Commands of the Departments of the Navy and is available for use by all Departments and Agencies of the Department of Defense
switchboard-corrugated-type-2-class-iii.jpg

Corrugated Switchboard Matting - Type 2, Class III Non-Conductive Matting

  • Corrugated Switchboard Matting - Type 2, Class III Non-Conductive Matting has a higher rating of 40,000 VAC Dielectric Test Voltage
  • 3/8" Thick - Black Corrugated Surface
  • Not recommended to exceed 26,500 VAC
  • Full Rolls Only - 3' x 45' 
  • Corrugated Switchboard Matting - Type 2, Class III Non-Conductive Matting is tested to ASTM D178/ANSI J6.7 Standards and each roll has certification engraved on the underside
  • Corrugated Switchboard Matting - Type 2, Class III Non-Conductive Matting meets all optional requirements for Ozone Resistance, Flame Resistance and Oil Resistance
  • Use Corrugated Switchboard Matting - Type 2, Class III Non-Conductive Matting around high voltage equipment like control panels and fuse boxes when a Class II rating is insufficient
diamond-switchboard-40419.1383765711.1280.1280.jpg

Switchboard Matting - Diamond Plate - Type 2, Class II Non-Conductive Matting

  • Switchboard Matting - Diamond Plate - Type 2, Class II Non-Conductive Matting is popular when a Diamond Plate surface pattern is desired
  • 1/4" Thick Vinyl that meets all optional requiremnts for Ozone Resistance, Flame Resistance and Oil Resistance
  • Tested to 30,000 VAC - Not Recommended to exceed 17,000 VAC
  • Custom Lengths in 2', 3' and 4' Widths up to 75' in length
  • Tested to ASTM D178/ANSI J6.7 - Certification engraved on underside of matting
 switchboard-mat-blue-marbleized.png

Switchboard Matting - Type I - Marbleized Military - 1/8"

  • Specially treated for flooring applications, this non-conductive matting meets Mil. Spec. 15562-G Amend. 3, Type I.
  • Marbleized Military Switchboard has a singular purpose: to prevent life-threatening electrical shock disasters in high-voltage environments. Often referred to as insulative or Non-Conductive matting, Switchboard insulates the standing worker from high voltage shock that can lead to serious bodily harm, even death. What makes this particular mat unique is that it is designed for permanent flooring installation using any vinyl-mastic adhesive [professional floor installer is recommended]. Marbleized Military Switchboard is an essential safety product in a wide range of industries such as mining, munitions, military, utilities, heavy industry...anywhere the danger of lethal shock resides. Smooth surface is easy to clean and has exceptional ozone and oil resistance.
 switchboard-smooth-top.jpg

Mill Spec Smooth Top Switchboard Roll - 3' x 75' 1/8"

 

  • Conforms to MIL SPEC. MIL-DTL-15562G, Type II
  • This Specification is approved for use by all interested Commands of the Department of the Navy and the Marine Corps and is avaiable for use by all other Departments and Agencies of the Department of Defense.
  • Dielectric Test Voltage                           30,000 VAC
  • Proff Tested Over Entire Surface At          15,000 VAC
  • Recommended Maximum Use Voltage     3,000VAC
  •  Colors: Black, Blue, Green. Full Rolls Only.