Close

Additional Information

Site Information

Aluminum or Rubber Hinge 3/8" Frame Options - B

Below you will find Pictures of the different Frame Options for the Aluminum OR Rubber(Vinyl) Hinge 3/8" Roll Up Mat

 low-profile-base-tread-4.png

L Frame Recessed Application

  • Use L Frame when the pit has already been formed.
  • 1/2" total depth, 7/16" to 1" bottom leg
  • 1/4" Gauge Aluminum surface reveal.
  • Secure option
  • Recommended that screeding the pit floor to level with the horizontal leg of the frame profile
 

 

 base-vinyl-spacer.png

 Vinyl Spacer Recessed Application

  • Vinyl Spacer Edge offers a flush and easy transition from floor to mat.
  • A recessed frame option when pit has already been formed.
  • 2" x 3/8"
  • Can be cut on site to fit various filling needs.
  • Edge is attached directly to the Roll up Mat
  • Available with or without under-mat tonges upon request.
   
 base-aluminum-ramp.png

Aluminum Ramp Surface Applications 

 

  • Beveled Aluminum Edge that can be permanently screwed into the floor.
  • Edge is not attached to the Roll up mat - Holds the mat in place.
  • 1-3/8" x 3/8" surface ramp.
   
base-vinyl-ramp.png

Vinyl Ramp Surface Applications

  • Beveled Vinyl Edge allows for surface mat use.
  • 2" x 3/8" surface ramp.
  • Edge is attached directly to the Roll up Mat
  • Available with or without under-mat tonges upon request.

Call  800-739-6171 for Assistance or email us at help@madmatter.biz